Культура

Further in the ditches and in the aboveground part of the future base (inside the established formwork), a frame assembled from reinforcing bars, which are fastened with a...

The process of pouring the strip base is simple. Sand or sand-gravel mixture is poured to the bottom of the dug ditches and aligned. For the construction of...

The term of manufacture of such a foundation is longer than in the case of the use of another material, but this can be explained by the fact...

Monolithic strip foundation Stage 4. Casting To arrange a tape monolithic foundation, a concrete solution is necessary, since the device of such a base for the structure makes...

So that the aboveground part of the foundation, which rises above the ground at a distance of 30 to 50 cm, was made qualitatively, it is necessary to...

When arranging the base under the house, a material is necessary, which depends on the hydrogeological conditions of the region. On dry and less moist soil, the foundation...

For example, if we consider this indicator for the Moscow region, then it corresponds to 150 cm, and the depth of the monolithic strip foundation on the problem...

Sand pillow for a monolithic foundation Stage 3. Underground waters In the event that their level of occurrence is below the depth of freezing of the soil, then...

To increase the bearing capacity of the strip foundation of coarsely fractional gravel or sand, pillows are equipped, they tamp them and they turn into an artificial support...

This is important! The depth of the foundation should correspond to the depth of the soil layer that will serve as a natural support during the construction of...