Культура

the possibility of creating uniformity of the layer; compliance with the condition of the without no effort of the constructed design. For the possibility of creating interruptions in...

Creation technology The height of the layers of concrete, in addition to the brand used, depends on: the values ​​of the calculated pressure on the shields;

The sliding formwork method allows you to build a structure up to 4 m high per day and involves a round -the -clock mode of operation. The speed...

Further, after the full filling of the form, the calculated lifting speed is gradually achieved. Important! In parallel, concreting is carried out reinforcing, leveling defects on a finished,...

concrete seal using vibrators or manually; After grasping the concrete, the form rises by the jacks by ≈25 mm in one pass; Each next layer of concrete mixture...

Before concreting, the jacks are charged with rods from 1 to 1/3 of the calculated length; With concrete, up to ½ of the shield is filled with concrete,...

mounting jack frames taking into account the fact that the step depends on the free length of the wall, the carrying capacity of the jack; Scientifics are hung...

The technology of sliding formwork is based on phased, but continuous concreting. The main stages of the installation of formwork and concreting: installation of internal shields on the...

hydraulic Electric. As a result of using a manual jack, its rods remain inside the structure and serve for reinforcement. In other types of jacks, the rods are...

Important! The rods should have a load -bearing load by an order of magnitude larger than the acting on them. The jacks use various designs: manual,