Культура

It should be taken into account that jumpers (vertical) are mounted from 0.3 to 0.8 m distance from each other. They are made from a smaller smooth rod.

Tape foundation reinforcement scheme Basically, four longitudinal horizontal rods are laid, two of which are placed at the top, and the other two on the bottom of the...

Horizontal longitudinal rods take over most of the bearing capacity in the areas of the base, and the transverse horizontal and vertical ones, give strength and are used...

A reinforcement plan In order for the erected foundation to maintain strength for a long time, it is necessary to carry out work on reinforcing not only the...

For this work, the rods are mainly used 10 - 12 mm of the section, less often their diameter is 14 mm. But if the building is erected...

What cross section is used? To calculate the bearing capacity on the basis of the structure, and in order to determine the desired diameter of the reinforcement for...

In order for this building material to maintain plasticity, it must be reinforced, for this, a metal rod is used, which for a better connection with concrete has...

The main thing is not only to choose concrete with the necessary characteristics, but also to choose a suitable reinforcement scheme. Here I would like to note that...

For the strength and reliability of the structure, it is necessary to correctly calculate not only the diameter, deepening, but also the number of required reinforcement.

Reinforcement of the strip foundation The main parameters This type is used in construction, as it is suitable for any type of soil, the life of the building...