Культура

Knitting reinforcement Recommendations When acquiring the reinforcement to the consultant, explain what type of construction you plan to build, since rods of different diameters are used for various...

They take into account that horizontally the rods are laid in pairs at 0.3 m distance from each other. And vertically - with a 2m step; Sometimes to...

For high -quality reinforcement of crosses and angles, special corners are bent, using rods (class A3), since their hardening is not carried out with a simple crosshair, because,...

Particular attention is paid to strengthening the angles of the enclosure of the basement strip, since the angle of such a structure is subject to concentrated stress.

So that the reinforcement scheme of the strip foundation is of high quality, that the rods do not come into contact with the formwork and soil, otherwise they...

All gaps-between the steps of the transverse reinforcement and the bonds of the longitudinal, SNiP-OM (52-01-2003) are determined; When connecting the reinforcement, welding cannot be used, since the...

In order to connect the transverse and vertical reinforcement in the frame, a clamp is used. Such a ligament is intended to fix the rods in the necessary...

If the base has a height of more than 1.5 m, then both transverse and vertical rods are mounted. For them, smooth hot roller reinforcement is used (class...

Longitudinal rods that are laid in the lower and upper parts of the base, perceive the main loads. They use hot -rolled rod reinforcement (class A3).;

Since the compression load acts on concrete, and steel rods are exposed to stretching, only the upper and lower parts of the base reinforce. And on the middle...