Культура

The outer surface of the roof is covered with a special flooring, which should be dense and is not able to deform, as well as resistant to weather...

Then the following layers of foam block structures with a width of 19 cm are attached. The finished design should contain several foures for ventilation.

The grate is installed with a gap of 50 cm. It is necessary to ensure that the supporting structures have a gap of 10.2 cm. Thus, the black...

When the wall decoration process is completed, you need to fix the fasteners under the roof. Usually used boards in size 10x40 cm and uterus made of wood...

It is necessary to carefully monitor the horizontal and vertical layers. They are controlled using a laser and construction level. Roof installation process

Waiting for the required time to harden the structure is not required. It is superimposed immediately after breeding on the block and the next layer is laid out...

Subsequent rows are installed using a mixture of glue. It is made thanks to the connection of dry elements and mixing them using a drill and a corolla.

Then it is necessary to pour concrete into the formwork. Typically, this technology is used in the manufacture of ceilings or doorways. To achieve the best effect, the...

Subsequent rows must be fixed using special glue. Usually in stores it is sold in special bags in the form of a conventional mixture. Next, a certain volume...

When this series is completed, it is necessary to align the surface and eliminate possible ledges and changes in the height in parts of the foundation. To carry...